How To Safely Clean iPhone’s Charging Port At Home

iPhone not charging? This charging port cleaning tip might save it

If your iPhone is not charging properly, there could be dust or dirt inside the charging port. This problem happens when we keep the phone in our pocket or bag. Slowly, dust goes inside the port and gets stuck. Then, when we try to charge, it doesn’t work well.

Many people try to clean it using sharp things like pins or tweezers. But this can damage the phone more. iPhone’s charging port is very delicate, so cleaning it the right way is very important.

What Apple says

Apple says not to use compressed air or water while cleaning. If your phone is not charging, first restart it. Then, check the cable and charger for any damage. If they are fine, then you can try to clean the port. If still not working, let the phone charge for 30 minutes, then try force restart. If nothing helps, take it to the Apple service center.

How to clean your iPhone’s charging port safely

1. Turn off the iPhone – Always switch off your phone before cleaning.

2. Keep the phone steady – Place the phone on a table or support it so that it doesn’t move.

3. Use a flashlight – Shine a light inside the port to see if there is dust or anything stuck.

4. Clean loose dust – If you see hair or fluff, use a soft, dry brush or clean paintbrush to remove it gently.

5. Clean inside carefully – Use the same soft brush to remove dust inside the port. Don’t push hard.

6. Remove hard dust – If the brush can’t remove it, use a wooden toothpick gently. Don’t use metal things like pins because they can damage the phone. After that, use the brush again.

7. Final step – After cleaning, hold the phone upright and tap it lightly so any remaining dust falls out.

Tips to keep the charging port clean

• Clean your bag or pocket regularly so that less dust goes into the port.

• Don’t keep your iPhone in dusty places.

• Use a dust plug if needed.

• Check the port with a flashlight from time to time.

• If charging stops, and the port looks clean, maybe some other part of the phone has a problem.

What to do if water gets into the charging port?

If water gets into the port by mistake, first turn off the phone. Hold the phone upright and lightly tap it so the water comes out. Then keep the phone in a dry place with good air, or use a fan to dry it. Do not use cotton or anything else to dry inside. Wait at least 24 hours before using the phone again.

How often to clean the charging port?

Only clean it when needed. If you clean it too much, it might get damaged. Check the port every few months. If you see dust, clean it gently with a soft brush. If you are not confident, it’s better to go to an Apple store.

ALSO READ: Punkt. MP01 and MP02 Are Changing The Way We Use Technology